Post by strider wolf on Dec 5, 2006 20:18:15 GMT 9
Devhook .51 + Emulated Firmware 3.01 Install Guide
This Guide is NOT written by me (xche78x)
This Guide is created by Man007 & Hardrive
Posted @ QJ.net Forums
forums.qj.net/f-psp-homebrew-and-hacks-help-21/t-devhook-50-setup-guide-faq-and-help-thread-v20-81061.html
Since I didn't copy the pictures, a lot may be confused so i advise to go directly to the qj.net forums link posted above!
Intro
As many of you can see, devhook .51 has been released. Installation for devhook .50 has been removed from this guide, as it's easier for .51
Well, devhook .51 has been released, its main feature being 3.01 firmware emulation. This guide will walk you through the setup and usage of devhook, without downloading any illegal files.
The spoilers for screenshots that you will see in this guide are the screenshots condensed. Click the show button to see the screenshot.
As always there is some risk involved with accessing flash and running homebrew. If something goes wrong I, the developers and nobody but yourself are to blame.
Warning: Illegal files MAY NOT be linked to or referenced on this site. The same applies for troubleshooting how to load ISO files. Anybody who breaks these rules will receive a ban. If you are confused please read the [QJ] Policy in my sig by clicking the sig picture. Thanks
Requirements
* A PSP with one of the following firmwares:
o 1.50 - Confirmed
o 2.71 SE-A - Unconfirmed
o 2.71 SE-B - Unconfirmed
o 2.71 SE-B' - Confirmed
o 2.71 SE-B'' - Confirmed
o 2.71 SE-C - Confirmed
o 2.71 with HEN-C - Confirmed - More info
o 2.71 with HEN-D - Confirmed - More info
* A memory stick (probably larger than 32 MB)
* A USB Cable or other means to transfer files to the PSP
* These downloads:
o WinRAR
o PSP Brew v.091 (or another means to extract data.psar from an eboot)
o 2.82 Update Eboot OR 3.01 Update Eboot
o PSAR Dumper
o DevHook .51
Installation
1. If you haven't already, install WinRar and PSP Brew.
2. Connect your PSP to yor PC using a USB cable.
3. Open up PSARDumper_300.zip Extract both folders to X:\PSP\GAME or X:\PSP\GAME150 (where X is your PSP's drive letter), depending on how your firmware is setup. If you don't know, read the readme's.
4. Extract the 2.82/3.01 Eboot WinZip file to anywhere on your hard drive.
5. Using PSP Brew, open the 2.82/3.01 Update Eboot (either double click it, or open through PSP Brew)
6. Extract the DATA.PSAR by clicking it, and then clicking extract file.
Spoiler for Screenshot:
7. Extract it to the root of your Memory Stick.
Spoiler for Screenshot:
8. Disable USB Mode, scroll right to the GAME tab, scroll down to the memory stick icon.
9. Launch PSAR Dumper V2B.
Spoiler for Screenshot:
When prompted, press 'X'. Wait for the program to finish executing. Your PSP will automatically reboot when it's done.
10. Now, enable USB again.
11. Open DH0510000.rar, double click DH0510000, double click MS_ROOT. Extract all of the files to the root of your memory stick. When prompted, click "Yes to all". Note: If you have custom firmware, and you 1.50 kernel homebrew folder is GAME150, you'll have to move the devhook launcher from the GAME folder to the GAME150 folder.
12. Delete the file DATA.PSAR, you won't need that anymore.
Spoiler for Screenshot:
Note: There should be an "fbm" folder. These are old screenshots, sorry.
13. Right click the folder F0, select Cut.
14. Double click on dh, then double click 282/301. Right click in the blank white space, select paste. Click "Yes to all" when prompted.
Spoiler for Screenshot:
15. Optionally, you can delete the following folders in the PSP\GAME folder: psar_dump2, psar_dump2%.
16. Disable USB mode.
17. Scroll to the GAME tab, and launch DEVHOOK0.51.BETA launcher.
Spoiler for Screenshot:
18. Scroll to Flash Install, and press 'O'.
19. If you had already flashed a different firmware with devhook to flash, remove it, by scrolling to remove.
20. Now, press 'O' on "Install configfile to flash1:". A screen will come up, if you accept the terms, hold 'O' for a little more than a second.
21. Wait just a bit, then at the very bottom OR the very top of you screen it will say "press any key to continue".
22. Scroll to Firmware, press 'O', and ensure that 2.82/3.01 is selected, and press 'O'.
Spoiler for Screenshot:
23. If all goes well, your PSP should boot into 2.82/3.01!
Spoiler for Screenshot:
Spoiler for Screenshot:
FAQS
Can I overclock in devhook?
Yes, either from the launcher, or the VSHEX mod menu.
I boot devhook, and all I get is a black screen or a blue your settings or corrupted screen
Refollow the guide. It has just been updated, and make sure that you follow close attention to step 18-21, as those changed, and are CRUCIAL. It should work perfectly after that.
Sound doesn't work / UMD's don't load
This is partially my fault. The first revision of this guide didn't mention replacing the audio.prx with the decrypted one. Please refollow the guide, it's fixed now
The internet browser doesn't work
If you have correctly installed devhook .51, it should
Will SOCOM ftb2 work online?
Yes
Can I install devhook .46 and devhook .51 on the same memory stick?
Yes. However, you can't install devhook .46 and devhook .50.
The return to 1.50 mod doesn't work
It seems that it isn't supported with this version, sorry. However, read the next question.
How do I return to the firmware I'm emulating from?
1. In the XMB, press 'HOME'.
2. Scroll down to Escape Devhook, press 'O'
3. Now, left and right are switched, meaning that right selects Yes, and left selects No. This must be a glitch, because the functions are reversed. (Meaning that Yes won't quit, but No will)
4. Scroll to No, press 'O', and you will arrive at the firmware you started devhook from.
Credits
Hardrive - I wrote the guide
DevelopersBooster - For making devhook
PSPet - For making PSAR Extractor
The Noobz Team - For advancing PSAR Extractor to 3.0 and hosting
Dark_AleX - For making the custom firmware, and because he's having a rough time, and for working on PSAR Extractor
Stefano Rusello - For making PSP Brew
Corrections and FixesTwelve - My human spellcheck, thanks
Paulk501 - Black screen fix suggestion
hausome and Maxi_Jac'- A big thanks, suggested the flash1 rom thing, should fix most problems
Porkape - X-Flash removal finds
Ranger613 - Caught a useless step
Added contentdaggerer - For in-devhook screenshots
Gieese - Readme translations
Loading ConfirmationsNinkul - 1.50
linkinpark9812 - 1.50
mrbagrat - 2.71 SE-B and 2.71 SE-B''
pspuser129 - 2.71 SE-B''
Hardrive - 271 SE-C
Man007 - Giving links to HEN C and D
Misc.Man007 - For writing the first guide, sorry "Hardrive" stepped on your toes
QJ.net - For hosting the files and the forums
Anybody else that I forgot - I'm sorry .
Happy Devhook .51 Gaming - xche78x (mod)
This Guide is NOT written by me (xche78x)
This Guide is created by Man007 & Hardrive
Posted @ QJ.net Forums
forums.qj.net/f-psp-homebrew-and-hacks-help-21/t-devhook-50-setup-guide-faq-and-help-thread-v20-81061.html
Since I didn't copy the pictures, a lot may be confused so i advise to go directly to the qj.net forums link posted above!
Intro
As many of you can see, devhook .51 has been released. Installation for devhook .50 has been removed from this guide, as it's easier for .51
Well, devhook .51 has been released, its main feature being 3.01 firmware emulation. This guide will walk you through the setup and usage of devhook, without downloading any illegal files.
The spoilers for screenshots that you will see in this guide are the screenshots condensed. Click the show button to see the screenshot.
As always there is some risk involved with accessing flash and running homebrew. If something goes wrong I, the developers and nobody but yourself are to blame.
Warning: Illegal files MAY NOT be linked to or referenced on this site. The same applies for troubleshooting how to load ISO files. Anybody who breaks these rules will receive a ban. If you are confused please read the [QJ] Policy in my sig by clicking the sig picture. Thanks
Requirements
* A PSP with one of the following firmwares:
o 1.50 - Confirmed
o 2.71 SE-A - Unconfirmed
o 2.71 SE-B - Unconfirmed
o 2.71 SE-B' - Confirmed
o 2.71 SE-B'' - Confirmed
o 2.71 SE-C - Confirmed
o 2.71 with HEN-C - Confirmed - More info
o 2.71 with HEN-D - Confirmed - More info
* A memory stick (probably larger than 32 MB)
* A USB Cable or other means to transfer files to the PSP
* These downloads:
o WinRAR
o PSP Brew v.091 (or another means to extract data.psar from an eboot)
o 2.82 Update Eboot OR 3.01 Update Eboot
o PSAR Dumper
o DevHook .51
Installation
1. If you haven't already, install WinRar and PSP Brew.
2. Connect your PSP to yor PC using a USB cable.
3. Open up PSARDumper_300.zip Extract both folders to X:\PSP\GAME or X:\PSP\GAME150 (where X is your PSP's drive letter), depending on how your firmware is setup. If you don't know, read the readme's.
4. Extract the 2.82/3.01 Eboot WinZip file to anywhere on your hard drive.
5. Using PSP Brew, open the 2.82/3.01 Update Eboot (either double click it, or open through PSP Brew)
6. Extract the DATA.PSAR by clicking it, and then clicking extract file.
Spoiler for Screenshot:
7. Extract it to the root of your Memory Stick.
Spoiler for Screenshot:
8. Disable USB Mode, scroll right to the GAME tab, scroll down to the memory stick icon.
9. Launch PSAR Dumper V2B.
Spoiler for Screenshot:
When prompted, press 'X'. Wait for the program to finish executing. Your PSP will automatically reboot when it's done.
10. Now, enable USB again.
11. Open DH0510000.rar, double click DH0510000, double click MS_ROOT. Extract all of the files to the root of your memory stick. When prompted, click "Yes to all". Note: If you have custom firmware, and you 1.50 kernel homebrew folder is GAME150, you'll have to move the devhook launcher from the GAME folder to the GAME150 folder.
12. Delete the file DATA.PSAR, you won't need that anymore.
Spoiler for Screenshot:
Note: There should be an "fbm" folder. These are old screenshots, sorry.
13. Right click the folder F0, select Cut.
14. Double click on dh, then double click 282/301. Right click in the blank white space, select paste. Click "Yes to all" when prompted.
Spoiler for Screenshot:
15. Optionally, you can delete the following folders in the PSP\GAME folder: psar_dump2, psar_dump2%.
16. Disable USB mode.
17. Scroll to the GAME tab, and launch DEVHOOK0.51.BETA launcher.
Spoiler for Screenshot:
18. Scroll to Flash Install, and press 'O'.
19. If you had already flashed a different firmware with devhook to flash, remove it, by scrolling to remove.
20. Now, press 'O' on "Install configfile to flash1:". A screen will come up, if you accept the terms, hold 'O' for a little more than a second.
21. Wait just a bit, then at the very bottom OR the very top of you screen it will say "press any key to continue".
22. Scroll to Firmware, press 'O', and ensure that 2.82/3.01 is selected, and press 'O'.
Spoiler for Screenshot:
23. If all goes well, your PSP should boot into 2.82/3.01!
Spoiler for Screenshot:
Spoiler for Screenshot:
FAQS
Can I overclock in devhook?
Yes, either from the launcher, or the VSHEX mod menu.
I boot devhook, and all I get is a black screen or a blue your settings or corrupted screen
Refollow the guide. It has just been updated, and make sure that you follow close attention to step 18-21, as those changed, and are CRUCIAL. It should work perfectly after that.
Sound doesn't work / UMD's don't load
This is partially my fault. The first revision of this guide didn't mention replacing the audio.prx with the decrypted one. Please refollow the guide, it's fixed now
The internet browser doesn't work
If you have correctly installed devhook .51, it should
Will SOCOM ftb2 work online?
Yes
Can I install devhook .46 and devhook .51 on the same memory stick?
Yes. However, you can't install devhook .46 and devhook .50.
The return to 1.50 mod doesn't work
It seems that it isn't supported with this version, sorry. However, read the next question.
How do I return to the firmware I'm emulating from?
1. In the XMB, press 'HOME'.
2. Scroll down to Escape Devhook, press 'O'
3. Now, left and right are switched, meaning that right selects Yes, and left selects No. This must be a glitch, because the functions are reversed. (Meaning that Yes won't quit, but No will)
4. Scroll to No, press 'O', and you will arrive at the firmware you started devhook from.
Credits
Hardrive - I wrote the guide
DevelopersBooster - For making devhook
PSPet - For making PSAR Extractor
The Noobz Team - For advancing PSAR Extractor to 3.0 and hosting
Dark_AleX - For making the custom firmware, and because he's having a rough time, and for working on PSAR Extractor
Stefano Rusello - For making PSP Brew
Corrections and FixesTwelve - My human spellcheck, thanks
Paulk501 - Black screen fix suggestion
hausome and Maxi_Jac'- A big thanks, suggested the flash1 rom thing, should fix most problems
Porkape - X-Flash removal finds
Ranger613 - Caught a useless step
Added contentdaggerer - For in-devhook screenshots
Gieese - Readme translations
Loading ConfirmationsNinkul - 1.50
linkinpark9812 - 1.50
mrbagrat - 2.71 SE-B and 2.71 SE-B''
pspuser129 - 2.71 SE-B''
Hardrive - 271 SE-C
Man007 - Giving links to HEN C and D
Misc.Man007 - For writing the first guide, sorry "Hardrive" stepped on your toes
QJ.net - For hosting the files and the forums
Anybody else that I forgot - I'm sorry .
Happy Devhook .51 Gaming - xche78x (mod)